Motorola XPR 6100 Accessories

PMNN4066

IMPRES Li-ion 1500 mAh Submersible (IP57) Battery.

Original PMNN4066A IMPRES Li-ion 1500 mAh Submersible (IP57) Battery. The IP57 is a higher rating than the standard IP54 that helps provide first responders with high reliability in emergency situations. The number "5" stands for the dust intrusion rating, or the capcaity to withstand the effects of fine, abrasive dust particles. The "7" means a higher water intrusion rating.

PMNN4077

IMPRES Li-ion, 2200 mAh, 7.2V Submersible (IP57) Battery

4200865599

1.75” Wide Leather Belt

HLN6602

Universal Chest Pack with Radio Holder, Pen Holder and Velcro-Secured Pouch

Motorola Original Universal Chest Pack protects the radio and provides the freedom from holding it during standby communication mode. Universal Chest Pack fits virtually any radio.

NTN5243

Adjustable, Black Nylon Carrying Strap

Attaches to D-ring on cases.

PMLN4652

2.5" Belt Clip

PMLN5023

3" Replacement Swivel Belt Loop

PMLN5028

Hard Leather Carry Case with 2.5" Swivel Belt Loop for Non-Display Radio

PMLN5030

Hard Leather Carry Case with 3" Fixed Belt Loop for Non-Display Radio

RLN4815

RadioPAk Radio/Utility Case

The RadioPAk is lightweight and comfortable. Worn around the waist, it keeps radios/phones at hand. It features a separate 6 x 8 inch zippered pouch for other on-the-job necessities.

Adjustable woven nylon belt fits both men and women.

NNTN7392

IMPRES Battery Reader

The industry exclusive IMPRES Battery Reader provides IMPRES battery users the ability to access charging, reconditioning and key usage data that can affect overall battery performance. By keeping batteries in peak condition, talk time and cycle life are optimized, reducing battery replacement. Package includes IMPRES Battery Reader, system software, USB cord and adapter inserts for APX Series radios.

NNTN7677

Multi-Unit Charger Interface Unit Multi-Unit Charger Interface Unit, attaches to an APX, XTS, MOTOTRBO and Professional Series IMPRES multi-unit charger to enable the data transfer to IMPRES Battery Fleet Management. A CIU is required for IMPRES chargers that report data to IMPRES Battery Fleet Management.

NNTN8525

MOTOTRBO Travel Charger

RLN6433

Travel Charger Travel Charger (includes voltage-regulated lighter adapter, custom charger base, coil cord and mounting bracket)

WPLN4219

IMPRES Multi Unit Charger with Displays Ensures maximum talk-time and optimized battery cycle life. Automatically reconditions IMPRES batteries based on actual usage, keeping them in peak condition. These rapid rate 6-unit chargers are available with or without a display. Display modules provide powerful analyzing information, such as current charge status and actual battery capacity in milli amp hours (mAh).

AARLN4885

Receive-Only Covered Earbud with coiled cord

This earpiece is compatible with all Remote Speaker Microphones with a 3.5 mm audio jack on the head of the microphone.

NNTN8125

Wireless Accessory Kit, Standard Pair, 12in Cable Wireless Accessory Kit, Standard Pair, 12in Cable (Not compatible with SMARTNET/ Privacy Plus, Connect Plus, or LTR/PassPort modes of operation)

NNTN8127

Wireless Accessory Kit, Standard Pair Wireless Accessory Kit, Standard Pair (Not compatible with SMARTNET/ Privacy Plus, Connect Plus, or LTR/PassPort modes of operation)

NNTN8295

Earbud single with 45.7" cable, inline mic, BLACK Earbud single with 45.7" cable, inline mic, BLACK

NNTN8361

Eartips, Bulk Replacement Eartips, Bulk Replacement

PMLN5097

IMPRES 3 Wire Surveillance Kit, Black - Intrinsically Safe (FM)

PMLN5712

Operation Critical Wireless Adapter Operation Critical Wireless Adapter (designed for radio software version R01.07.00 or later) Please consider battery selection when using BT devices. The additional current drawn will impact battery run time. (Not compatible with SMARTNET/Privacy Plus, Connect Plus, or LTR/PassPort modes of operation)

PMLN6095

Audio Adapter, In‐Line PTT Adapter, GCAI

PMLN6124

IMPRES 3 Wire Surveillance Kit, with Translucent Tube, Beige ‐ FM / UL Approved

PMLN6126

Receive Only Surveillance Kit, Beige (single wire) ‐ FM / UL Approved

PMLN6128

IMPRES 2 Wire Surveillance Kit, Beige ‐ FM / UL Approved

PMLN6130

IMPRES 2 Wire Surveillance Kit w/ Translucent tube ‐ Beige ‐ FM / UL Approved

Clear Comfortable Earpiece

• RLN4760 - Small Clear Comfortable Earpiece, right ear
• RLN4761 - Medium Clear Comfortable Earpiece, right ear
• RLN4762 - Large Clear Comfortable Earpiece, right ear
• RLN4763 - Small Clear Comfortable Earpiece, left ear
• RLN4764 - Medium Clear Comfortable Earpiece, left ear
• RLN4765 - Large Clear Comfortable Earpiece, left ear

The Clear Comfortable Earpiece forms to the inside of the ear and is perfect for low noise environments. It's made of easy-to-clean, chemically-inert hypo-allergenic material.

RLN5879

Receive Only Surveillance Kit, Beige (single-wire) - Intrinsically Safe (FM)

RLN6279

Replacement Standard Earpiece - Black

RLN6282

Replacement Ear Tips, Clear - Pack of 50 Replacement Ear Tips, Clear - Pack of 50 (for use with RLN5886)

RLN6288

Replacement Earpiece with High Noise Kit Attached - Beige

RLN6500

Bluetooth Accessory Kit with NA Power Supply

RLN6511
RLN6512
RLN6513

EP7 Sonic Defender, use with RLN4941

PMLN5101

IMPRES Temple Transducer - Intrinsically Safe (FM)

IMPRES Temple Transducer with boom microphone and in-line push-to-talk button.
This headset allows the user to receive audio without covering the ear, allowing users to have their ears open to all external sounds such as warning and fire alarms, machinery and outside traffic.

PMLN5275

Heavy-Duty Headset, Noise Reduction = 24dB

Designed for rugged use in noisy environments where hearing protection is required. This dual-muff headset includes flexible noisecanceling boom microphone with a push-to-talk switch located on the earcup. This can be worn with or without a helmet.

RLN6490

XBT Headset BTN, Heavy-Duty Headset , BT

RMN5058

Lightweight Headset, over-the-head, single-muff with in-line push-to-talk

Provides high-clarity, hands-free discreet two-way communication, while maintaining the comfort necessary for extended wear in moderate noise environments.

This single-muff adjustable headset comes with rotating boom microphone for left or right positioning. Includes an in-line push-to-talk button.

RMN5138

3M Peltor MT Series 2‐Way Comm Headset, MT7H79B Neckband

NNTN8383

IMPRES Industrial Noise Cancelling Microphone with threaded 3.5mm audio jack ‐ UL Approved

PMMN4025

IMPRES Remote Speaker Microphone with 3.5mm audio jack - Intrinsically Safe (FM)

PMMN4041

IMPRES Public Safety Microphone, 30" Cable IMPRES Public Safety Microphone, 30" Cable (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086. Listed within Antenna Section) - Intrinsically Safe (FM)

PMMN4043

IMPRES Public Safety Microphone, 18" Cable - Intrinsically Safe (FM) IMPRES Public Safety Microphone, 18" Cable (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086. Listed within Antenna Section) - Intrinsically Safe (FM)

PMMN4047

IMPRES Public Safety Microphone, 30" Cable - Submersible (IP57) IMPRES Public Safety Microphone, 30" Cable - Submersible (IP57) (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086 - Listed within Antenna section) - Intrinsically Safe (FM)

PMMN4049

IMPRES Public Safety Microphone, 18" Cable - Submersible (IP57) IMPRES Public Safety Microphone, 18" Cable - Submersible (IP57) (antenna sold separately - PMAE4046, PMAE4047, PMAD4087, PMAD4086 - Listed within Antenna section) - Intrinsically Safe (FM)

RLN6074

Remote Speaker Microphone Replacement Coil Cord Kit Remote Speaker Microphone Replacement Coil Cord Kit (for PMMN4024 and PMMN4040)

RLN6075

Remote Speaker Microphone Replacement Coil Cord Kit (for PMMN4025, PMMN4046, and PMMN4050